From the Web Portal:
- Log in to your web portal
- Click on Settings
- Click on POS Device Settings
- Click on Manage Printers
- For Printer Type, Select “Ethernet”
- Provide Name, IP address and Product Id: 9100.
Note:
To find out IP address of your printer, connect it to the router with an ethernet cable.
→ Power off the printer
→ Click and hold the “Feed” button
→ Power on the printer
Check for: IPv4 Address
For example: 192.168.1.100
Use this IP in the IP address field above and Save.
From POS System:
- Click on Manage
- Click on Settings
- Click on POS Device Settings
- Click on Printer Locations
- Click on “Add Printer Location”
- For Printer Type, Select “Ethernet”
→ Provide Name, IP address and Product Id: 9100.
Note:
To find out IP address of your printer, connect it to the router with an ethernet cable.
→ Power off the printer
→ Click and hold the “Feed” button
→ Power on the printer
Check for: IPv4 Address
For example: 192.168.1.100
Use this IP in the IP address field above and Save.
Testing the Printer:
To test this newly added printer is connected or not, follow:
→ Go to Printer Locations as Previous
→ Click on 3 dots of this newly added printer in the right hand section.
→ Click on “Connect”
→ If the printer prints “Printer is Connected”, you have successfully added a new ethernet printer.